Test and adjustment values: Passenger cars: Crank assembly - BE03.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| TDC sensor bracket | ENGINE 604, 605, 606 / | BE03.00-P-1000-01A | |
| Inspection data of connecting rod | ENGINE 601.943, 602.980 /982 /983 /984 /985 | BE03.10-N-1000-01D | |
| Test dimensions for pistons | ENGINE 601.943, 602.980 /982 /983 /984 /985 | BE03.10-N-1000-02E | |
| Inspection data of connecting rod | ENGINE 111, 166, 668... | BE03.10-P-1000-01A | |
| Inspection data of connecting rod | ENGINE 120 | BE03.10-P-1000-01B | |
| Check values for connecting rod | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 646, 647, 648... | BE03.10-P-1000-01C | |
| Inspection data of connecting rod | ENGINE 112, 113, 155... | BE03.10-P-1000-01D | |
| Check values for connecting rod | ENGINE 137.970 | BE03.10-P-1000-01E | |
| Inspection data of connecting rod | ENGINE 640 | BE03.10-P-1000-01F | |
| Test values for connecting rod | ENGINE 629, 642 / | BE03.10-P-1000-01G | |
| Test values for pistons | ENGINE 111.920 /921 /940 /941 /942 /943 /944 /945 /946 /947 /960 /961 /970 /973 /974 /975 /977 | BE03.10-P-1000-02A | |
| Test values for pistons | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 629, 642... | BE03.10-P-1000-02B | |
| Test values for pistons | ENGINE 120 with CODE (473) ENGINE with low compression | BE03.10-P-1000-02C | |
| Check values for pistons | ENGINE 112, 113, 155, 272, 273... | BE03.10-P-1000-02D | |
| Test values for pistons | ENGINE 137.970 | BE03.10-P-1000-02E | |
| Check values for pistons | ENGINE 271, 275, 285... | BE03.10-P-1000-02F | |
| Test values for pistons | ENGINE 642 | BE03.10-P-1000-02G | |
| Test values for pistons | ENGINE 640 | BE03.10-P-1000-02H | |
| Check values for pistons | ENGINE 646.951 /8 /961 /962 /963 /966, 647, 648 | BE03.10-P-1000-02I | |
| Test data for conrod bolts | ENGINE 111, 112, 113, 137, 155, 156, 271, 272, 273, 275, 285, 604, 605, 606... | BE03.10-P-1000-03A | |
| Inspection data of conrod bolts | ENGINE 103 /, 104 /, 119, 120 | BE03.10-P-1000-03B | |
| Test values for connecting rod bolts | ENGINE 601, 602 /, 603 / (except, 602.98 /98) | BE03.10-P-1000-03C | |
| Test values for conrod bolts | ENGINE 611, 612, 613, 628, 629, 642, 646, 647, 648, 668... | BE03.10-P-1000-03D | |
| Inspection data of conrod bolts | ENGINE 166.940 /960 /961 /990 /991 /995 | BE03.10-P-1000-03E | |
| Inspection data for conrod bolts | ENGINE 266.920 /940 /960 /980 | BE03.10-P-1000-03F | |
| Inspection data of conrod bolts | ENGINE 640 | BE03.10-P-1000-03G | |
| Test values for piston rings | ENGINE 120 | BE03.10-P-1000-05A | |
| Check values for piston rings | ENGINE 112, 113, 137, 155, 275, 285 | BE03.10-P-1000-05B | |
| Inspection data of piston rings | ENGINE 271.940 /941 /942 /943 /944 /946 /948 | BE03.10-P-1000-05C | |
| Check values for piston rings | ENGINE 156, 272.91 /92 /94 /96 /97 /98 /99, 273.92 /96 | BE03.10-P-1000-05D | |
| Test values for piston rings | ENGINE 642 | BE03.10-P-1000-05E | |
| Inspection data of piston rings | ENGINE 266.920 /940 /960 /980 | BE03.10-P-1000-05F | |
| Inspection data of piston rings | ENGINE 640 | BE03.10-P-1000-05I | |
| Check values for piston rings | ENGINE 646.951 /8 /961 /962 /963 /966, 647, 648 | BE03.10-P-1000-05J | |
| Inspection data of bolts for crankshaft bearing caps | ENGINE 601, 602 /982 /983 | BE03.20-N-1000-01B | |
| Crankshaft test data | ENGINE 601.943, 602.980 /981 /982 /983 /984 /985 | BE03.20-N-1000-02D | |
| Test values for crankshaft main bearing shells | ENGINE 601.943, 602.980 /981 /982 /983 /984 /985 | BE03.20-N-1000-03A | |
| Test values for crankshaft bearing play | ENGINE 601.943, 602.980 /981 /982 /983 /984 /985 | BE03.20-N-1000-04A | |
| Test values for crankshaft bearing cap bolts | ENGINE 111, 604, 605, 606, 611, 612, 613, 628, 646, 647, 648... | BE03.20-P-1000-01A | |
| Test values for crankshaft bearing cap bolts | ENGINE 601, 602, 603 | BE03.20-P-1000-01B | |
| Inspection data of crankshaft bearing cap bolts | ENGINE 137, 275, 285 | BE03.20-P-1000-01C | |
| Inspection data of bolts of crankshaft bearing caps | ENGINE 642 | BE03.20-P-1000-01D | |
| Inspection data of bolts of crankshaft bearing caps | ENGINE 640 | BE03.20-P-1000-01E | |
| Crankshaft test data | ENGINE 111, 112.951 /976, 166.940 /960 /990, 668.940 /941 /942 | BE03.20-P-1000-02A | |
| Crankshaft test data | ENGINE 120 | BE03.20-P-1000-02B | |
| Crankshaft test data | ENGINE 601, 602 /, 603 / (except, 602.98 /98) | BE03.20-P-1000-02C | |
| Crankshaft test data | ENGINE 604, 605, 606 /, 611, 612.961 /962 /963 /990, 613 | BE03.20-P-1000-02D | |
| Test values for crankshaft | ENGINE 629, 642, 646 | BE03.20-P-1000-02E | |
| Crankshaft test data | ENGINE 640 | BE03.20-P-1000-02F | |
| Check values for crankshaft main bearing shells | ENGINE 604, 605, 606, 611, 612, 613, 646, 647, 648... | BE03.20-P-1000-03A | |
| Test values for crankshaft main bearing shells | ENGINE 601, 602, 603 | BE03.20-P-1000-03B | |
| Test values for crankshaft main bearing shells | ENGINE 111 | BE03.20-P-1000-03C | |
| Inspection data of crankshaft main bearing shells | ENGINE 628.960 /961 /962 /963, 629, 642 | BE03.20-P-1000-03D | |
| Test values of crankshaft main bearing shells | ENGINE 137, 275.950 /951 /953 /954 /980 /981 /982, 285.950 /980 | BE03.20-P-1000-03E | |
| Inspection data of crankshaft main bearing shells | ENGINE 612.967 in MODEL 209 | BE03.20-P-1000-03F | |
| Inspection data of crankshaft main bearing shells | ENGINE 640 | BE03.20-P-1000-03H | |
| Check values for crankshaft bearing clearance | ENGINE 604, 605, 606, 611, 612, 613, 628, 629, 642, 646, 647, 648... | BE03.20-P-1000-04A | |
| Test values for crankshaft bearing play | ENGINE 120 | BE03.20-P-1000-04B | |
| Test values for crankshaft bearing play | ENGINE 601, 602 /, 603 / (except, 602.982) | BE03.20-P-1000-04C | |
| Inspection data of crankshaft bearing play | ENGINE 111, 166.940 /960 /990, 668.940 /941 /942 | BE03.20-P-1000-04D | |
| Check values for crankshaft bearing clearance | ENGINE 112, 113, 137, 155, 156, 271, 272, 273, 275, 285... | BE03.20-P-1000-04E | |
| Inspection data of crankshaft bearing clearance | ENGINE 640 | BE03.20-P-1000-04F | |
| Lanchester balancer | ENGINE 646.961 /962 /963 /966 /8 | BE03.20-P-1000-05A | |
| Flywheel, driven plate | ENGINE 111, 271, 604, 605, 606, 611.96 /981 /983 /987, 612.981 /96 /99, 613 | BE03.30-P-1000-01A | |
| Flywheel, driven plate | ENGINE 103 /, 104 /, 119, 120 | BE03.30-P-1000-01B | |
| Flywheel, driven plate | ENGINE 601, 602 /, 603 / (except, 602.98 /98) | BE03.30-P-1000-01C | |
| Belt pulley/vibration damper | ENGINE 111, 112 /, 113 /, 137, 155.980 | BE03.30-P-1000-02A | |
| Belt pulley/vibration damper | ENGINE 120 | BE03.30-P-1000-02B | |
| Belt pulley/vibration damper | ENGINE 271, 275, 285 | BE03.30-P-1000-02C | |
| Belt pulley / vibration damper | ENGINE 642 / | BE03.30-P-1000-02D | |
| Flywheel | ENGINE 601, 602 /, 604, 605, 606 / | BE03.30-P-1000-03A | |
| Flywheel | ENGINE 103 /, 104 /, 111 | BE03.30-P-1000-03B | |
| Flywheel | ENGINE 601, 603 / | BE03.30-P-1000-03C | |
| Starter ring gear | ENGINE 602 /, 604, 605, 606 /, 611, 612.961 /962 /963 /965 /966 /967 /990 | BE03.30-P-1000-04A | |
| Starter ring gear | ENGINE 120 | BE03.30-P-1000-04B |