Check values for pistons - BE03.10-P-1000-02D (ML350, ML500, ML550, GL450, GL550)

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.

Engines 112, 113, 155, 272, 273

CHECK VALUES FOR PISTONS

Number	Designation			Engines 112.910/911	Engine 112.912	Engine 112.913
BE03.10-P-1001-02D	Piston diameter	Standard identification X	mm	83.175...83.195	83.175...83.195	89.875...89.895
		Auxiliary ⓧ identification	mm	83.225...83.245	83.225...83.245	89.922...89.952
		Repair size	mm	83.425...83.445	83.425...83.445	90.125...90.145
BE03.10-P-1002-02D	Piston clearance	Standard identification X	mm	≤ 0.040	≤ 0.040	≤ 0.043
		Auxiliary ⓧ identification	mm	≤ 0.040	≤ 0.040	≤ 0.043
		Repair size	mm	≤ 0.040	≤ 0.040	≤ 0.043

CHECK VALUES FOR PISTONS

Number	Designation			Engines 112.920/921/940/941/942/943/944/945, 113.940/941/942/944	Engines 112.946/946/947/949/960	Engine 113.960/961/962961/962/963/964/965965/967/967/968/971980/981/980/981/982984/990/984
BE03.10-P-1001-02D	Piston diameter	Standard identification X	mm	89.872...89.902	89.872...89.902	96.972...97.000
		Auxiliary ⓧ identification	mm	89.872...89.902	89.872...89.902	97.022...97.050
		Repair size	mm	90.122...90.152	90.122...90.152	97.222...97.250
BE03.10-P-1002-02D	Piston clearance	Standard identification X	mm	≤ 0.043	≤ 0.043	≤ 0.043
		Auxiliary ⓧ identification	mm	≤ 0.043	≤ 0.043	≤ 0.043
		Repair size	mm	≤ 0.043	≤ 0.043	≤ 0.043

CHECK VALUES FOR PISTONS

Number	Designation			Engine 112.960/960/961 961 AMG	Engines 113.987/988/989/990/991/992/993/995	Engine 155
BE03.10-P-1001-02D	Piston diameter	Standard identification X	mm	89.875...89.895	96.975...96.995	-
		Auxiliary ⓧ identification	mm	89.925...89.945	97.025...97.045	-
		Repair size	mm	90.125...90.145	97.225...97.245	-
BE03.10-P-1002-02D	Piston clearance	Standard identification X	mm	≤ 0.04	0.005...0.040	-
		Auxiliary identification ⓧ	mm	≤ 0.04	0.005...0.040	-
		Repair size	mm	≤ 0.04	0.005...0.040	-

CHECK VALUES FOR PISTONS

Number	Designation			Engine 272.91/92/94	Engine 272.96/97/98/99	Engine 273.92
BE03.10-P-1001-02D	Piston diameter	Standard identification X	mm	87.973...88.003	92.863...92.897	92.863...92.897
		Auxiliary ⓧ identification	mm	88.073...88.103	92.963...92.997	92.963...92.997
		Repair size	mm	88.223...88.253	93.113...93.147	93.113...93.147
BE03.10-P-1002-02D	Piston clearance	Standard identification X	mm	0.003...0.042	0.003...0.052	0.003...0.052
		Auxiliary ⓧ identification	mm	0.003...0.042	0.003...0.052	0.003...0.052
		Repair size	mm	0.003...0.042	0.003...0.052	0.003...0.052

CHECK VALUES FOR PISTONS

Number	Designation			Engine 273.96
BE03.10-P-1001-02D	Piston diameter	Standard identification X	mm	97.973...98.007
		Auxiliary ⓧ identification	mm	98.073...98.107
		Repair size	mm	92.223...92.257
BE03.10-P-1002-02D	Piston clearance	Standard identification X	mm	0.007...0.042
		Auxiliary ⓧ identification	mm	0.007...0.042
		Repair size	mm	0.007...0.042