Wiper system (WSA), function - GF82.30-P-0003CW
MODEL 204.0 /2 up to Model Year 8
General information
The wiper system controls windshield wiping and washing. The front SAM control unit with fuse and relay module (N10/1) takes over the control.
Operation takes place via the combination switch (S4).
The wiper system enables the following subfunctions:
- Windshield wiping
- Wiper startup suppression (with code (345) Rain sensor)
- Wiper stop (with code (551) Anti-theft alarm system (ATA [EDW]))
- Automatic speed reduction of the wiper system (not model 204.0 with code (494) USA version)
- Windshield washing
- Washer nozzle/washer nozzle hose heater function (with code (875) Heated windshield washer system)
- Liftgate wiper system function (model 204.2)
| Wiper system (WSA), location of components | Model 204.0 | GF82.30-P-0003-01CW | |
| Model 204.2 | GF82.30-P-0003-01CX | ||
| Wiper system (WSA) block diagram | GF82.30-P-0003-04CW | ||
| Windshield wiper, function | GF82.30-P-3004CW | ||
| Wiper start suppression function | With code (345) Rain sensor | GF82.30-P-3008CW | |
| Wiper stop function | With code (551) Anti-theft alarm system (ATA [EDW]) | GF82.30-P-3010CW | |
| Wiper system automatic speed reduction, function | Model 204.0 without code (494) USA version, Model 204.2 |
GF82.30-P-4006CW | |
| Windshield washer, function | GF82.35-P-3002CW | ||
| Washer nozzles/washer nozzle hose heater, function | With code (875) Heated windshield washer system | GF82.35-P-3003CW | |
| Rear window wiper system, function | Model 204.2 | GF82.30-P-2200CX |