Testing and repair work: Passenger cars: Seats, bunks, restraint systems - AR91.00-Z-9170AA
MODEL 170
| Removing and installing front seats | MODEL 170 | AR91.10-P-1000G | |
| Remove and install front seat backrest | MODEL 170 | AR91.10-P-1060G | |
| Remove/install driver's seat cushion | MODEL 170 except CODE (560) Left and right electrically adjustable driver seat | AR91.10-P-1070G | |
| Removing and installing driver's seat cushion | MODEL 170 with CODE (560) Left and right electrically adjustable front seat | AR91.10-P-1070GA | |
| Removing and installing drive for backrest adjustment | MODEL 170 | AR91.10-P-1100G | |
| Remove/install front seat adjustment mechanism | MODEL 170 | AR91.10-P-1450G | |
| Removing and installing control cable for seat height adjustment | MODEL 170 | AR91.10-P-1500G | |
| Removing and installing housing on handle for seat height adjustment | MODEL 170 | AR91.10-P-1510G | |
| Removing and installing gas-operated strut on seat adjustment mechanism | MODEL 170 | AR91.10-P-1550G | |
| Removing and installing rear shell on front seat backrest | MODEL 170 | AR91.10-P-1915G | |
| Removing and installing head restraint guides on front seats | MODEL 170 | AR91.16-P-0050G | |
| Removing and installing cover on front seat cushion | MODEL 170 | AR91.18-P-1800G | |
| Removing and installing cover on front seat backrest | MODEL 170 | AR91.18-P-1820G | |
| Removing and installing seat adjustment switch unit on front seats | MODEL 170 with CODE (560) Left and right electrically adjustable front seat | AR91.29-P-0003GG | |
| Removing and installing front power seat motor group (seat cushion) | MODEL 170 with CODE (560) Left and right electrically adjustable front seats | AR91.29-P-1420G | |
| Removing and installing seat height adjustment motor | MODEL 170 with CODE (560) Left and right electrically adjustable front seats | AR91.29-P-1421GG | |
| Removing and installing front seat backrest motor | MODEL 170 with CODE (560) Left and right electrically adjustable front seats | AR91.29-P-1431G | |
| Removing and installing control module and switches for left and right front heated seats | MODEL 170 with CODE (873) Left and right front heated seats | AR91.30-P-0001G | |
| Render emergency tensioning retractor units unusable | MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 414, 463 ... | AR91.40-P-0611A | |
| Checking recognition of actuation state of emergency/compact tensioning retractors | MODEL 170 as of 1.6.98, 203, 208 as of 1.6.98, 209, 210.0 /6 as of 1.6.98, 215, 220, 230 | AR91.40-P-0612A | |
| Removing and installing seat belt with emergency tensioning retractor | MODEL 170 | AR91.40-P-0630G | |
| Removing and installing safety belt lock (front seat) | MODEL 170 | AR91.40-P-1515G | |
| Remove/install roll bar | MODELS 170 | AR91.50-P-2000G | |
| Deactivating passenger airbag when using a reboard child seat | MODEL 170 | AR91.60-P-0001D | |
| Reactivating passenger airbag after deactivation | MODEL 170 | AR91.60-P-0002D | |
| Make airbag units unusable | MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463 ... | AR91.60-P-0611A | |
| Removing and installing airbag/emergency tensioning retractor control module | MODEL 170 | AR91.60-P-0622G | |
| Removing and installing airbag on steering wheel | MODEL 170, 208 | AR91.60-P-0660G | |
| Removing and installing front passenger airbag | MODEL 170 | AR91.60-P-0680G | |
| Removing and installing side airbag in front door | MODEL 170 with CODE (292) Side airbag at front left and right | AR91.60-P-0690G | |
| Removing and installing side airbag sensor | MODEL 170 with CODE (292) left and right front side airbag | AR91.60-P-0710G | |
| Removing and installing seat occupied recognition sensor | MODEL 170 | AR91.60-P-0720G |