Removing and installing front seats - AR91.10-P-1000G

MODEL 170 

Fig 1: Identifying Front Seats Remove/Install Components

	Removing, installing
1	Move driver's (1) seat all the way back
2	Pull front covering (2) from seat runners
3	Unscrew 2 screws (3)		*BA91.10-P-1001-01A
4	Move driver's (1) forward
5	Unscrew screw (4) at belt end fitting (17 mm)	During installation, screw belt end fitting on such that it can be moved.	*BA91.40-P-1001-01F
6	Remove belt end fitting from seat adjuster
7	Undo 2 screws (5)		*BA91.10-P-1001-01A
8	Remove connectors for seat heater, seat occupation (passenger) or electrical seat adjustment
9	Move driver's seat (1) backward, lift and remove	During installation, insert arresting bolts (6) in holes in rear console in floor of vehicle.
10	Install in the reverse order

FRONT SEATS

Number	Designation		Model 170
BA91.10-P-1001-01A	Bolt to seat runner	Nm	50

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 170
BA91.40-P-1001-01F	Screw at belt end fitting	Nm	35