Removing and installing rear shell on front seat backrest - AR91.10-P-1915G

MODEL 170 

Fig 1: Identifying Rear Shell On Front Seat Backrest Remove/Install Components

	Removal, installation
1	Remove cover on front seat backrest (only down to item 6)	Do not  remove cover from foam rubber pad	AR91.18-P-1820G
2	Unscrew screws (3) on left and right	Use T25 Torx socket bolt attachment
			Figure
3	Unhook rear shell (1) at top of backrest frame (2) (arrows) and remove from backrest frame (2)	When installing attach sheet metal clips (4, 4 each) to backrest frame (2)
4	Reinstall in opposite order

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)