LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> ML430 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Mixture Formation - 163 Chassis (3 Of 4) >> Self-Diagnostic System >> ME-SFI ignition system, testing of electrical system - AD07.61-P-6001B

ME-SFI ignition system, testing of electrical system - AD07.61-P-6001B

ENGINES 113.940 /942 /943 up to 31.5.00, 113.961 

DANGER Hazard  from contact with parts conducting high voltages. Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. AS15.10-Z-0001-01A
DANGER Lethal hazard  from being drawn into rotating vehicle parts Do not reach into rotating parts.
Wear closed and close-fitting work clothes.
Secure area of rotating vehicle components against unauthorized access.
AS00.00-Z-0004-01A
DANGER Risk of explosion  from fuel igniting, risk of poisoning  from inhaling and swallowing fuel as well as risk of injury  to eyes and skin from contact with fuel. No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.
Wear protective clothing when handling fuel.
AS47.00-Z-0001-01A
IMPORTANT When disconnecting the connectors on the ME-SFI control module, disconnect the middle connector first and when connecting, connect the middle connector last.    
  Connection and use of testing equipment   AD00.00-P-1000AZ
  Gasoline injection and ignition system (ME-SFI) diagnosis - prerequisites   AD07.61-P-2000B 
  Tools for gasoline injection and ignition system, testing of electrical system   AD07.61-P-2000-06A 
  Connector assignment for ME-SFI gasoline injection and ignition system   AD07.61-P-2000-02B 
  Notes on gauge/test connection column
The numbers entered in parentheses, such as, for example in => 1.0 (2A) have the following meaning:
A = Connector A in the circuit diagram
2 = Socket 2 in the circuit diagram
   
  Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory Fault codes from P0000 to P0304 AD07.61-P-4000B 
  Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory Fault codes from P0305 to P0743 AD07.61-P-4000BA 
  Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory Fault codes from P0748 to P1747 AD07.61-P-4000BB 
a Ignition: OFF     
b Connect test wiring harness with socket box at ME-SFI control module (N3/10) according to connection diagram. IMPORTANT Plug with red identification is currently not needed because the function is not yet available in the ME-SFI control module.  
  Checking     
1 ME-SFI control module terminal 30, testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-01B 
2 ME-SFI control module terminal 87, testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-02B 
3 Ignition coil (T1/1), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-03B 
4 Ignition coil (T1/2), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-04B 
5 Ignition coil (T1/3), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-05B 
6 Ignition coil (T1/4), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-06B 
7 Ignition coil (T1/5), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-07B 
8 Ignition coil (T1/6), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-08B 
9 Ignition coil (T1/7), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-18A 
10 Ignition coil (T1/8), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-19A 
11 Crankshaft position sensor, testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-09B 
12 Camshaft Hall sensor, testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-10B 
13 Primary voltage (T1/1), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-11A 
14 Primary voltage (T1/2), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-12B 
15 Primary voltage (T1/3), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-13B 
16 Primary voltage (T1/4), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-14B 
17 Primary voltage (T1/5), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-15B 
18 Primary voltage (T1/6), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-16B 
19 Primary voltage (T1/7), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-20A 
20 Primary voltage (T1/8), testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-21A 
21 Ignition voltage, testing of electrical system, ME-SFI ignition system   AD07.61-P-6001-17B