Gasoline injection and ignition system (ME-SFI) diagnosis -prerequisites - AD07.61-P-2000B
ENGINES 113.940 /942 /943 up to 31.5.00,
113.961
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Lethal hazard from being drawn into rotating vehicle parts | Do not reach into rotating parts. Wear closed and close-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. |
AS00.00-Z-0004-01A | |
| Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes on avoiding damage to the ignition system | Engines 104, 111, 112, 113, 119, 120 with ME-SFI gasoline injection and ignition system | AH15.10-P-0002-01D | |
| The fault code cannot be read out with the pulse counter | |||
| When disconnecting the connectors on the ME-SFI control module, disconnect the middle connector first and when connecting, connect the middle connector D last. | |||
| Gasoline injection and ignition system (ME-SFI) location of components | Model 129 with ENGINE 113 | GF07.61-P-0001-01P | |
| Model 163 with ENGINE 113 | GF07.61-P-0001-01Q | ||
| Model 208 with ENGINE 113 | GF07.61-P-0001-01R | ||
| MODEL 210 with ENGINE 113 | GF07.61-P-0001-01S | ||
| Electric wiring diagrams | Model 129 Groups 00 and 07 | ||
| Model 208 Groups 00 and 07 | PE07.00-P-1100D | ||
| Model 210 Groups 00 and 07 | PE07.00-P-1100A | ||
| Connection and use of testing equipment | AD00.00-P-1000AZ | ||
| Connect hand-held-tester (HHT), read out diagnostic trouble code memory | AD00.00-P-2000-03A | ||
| Tools for gasoline injection and ignition system, testing of electrical system | AD07.61-P-2000-06A | ||
| Notes on diagnostic trouble code memory | AD07.61-P-2000-10C | ||
| Notes on HHT for ME-SFI gasoline injection and ignition system | AD07.61-P-2000-04A | ||
| Signal images ME-SFI gasoline injection system | AD07.61-P-2000-03A | ||
| Signal images ignition system | AD07.61-P-2000-07C | ||
| Connector assignment for ME-SFI gasoline injection and ignition system | AD07.61-P-2000-02B | ||
| Socket box connection diagram, testing of electrical system, ME-SFI | AD07.61-P-2000-01A | ||
| Tools for fuel pressures, testing of hydraulic system | AD07.61-P-2100-01A | ||
| Fuel pressures test connection | AD07.61-P-2100-02B | ||
| Tools for fuel pump, testing of hydraulic system | AD07.61-P-2200-01A | ||
| Connect socket box, testing of fuel pump | AD07.61-P-2200-02B | ||
| Tools for fuel injectors, testing of hydraulic system | AD07.61-P-2300-01A | ||
| Spray pattern, testing of fuel injectors | AD07.61-P-2300-03B | ||
| Connect socket box, testing of fuel injectors | AD07.61-P-2300-02B |