Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9140AA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 140

Removing and installing front spring	MODEL 140, 170, 202, 208, 210	AR32.20-P-0200B
Removing and installing rear spring	MODEL 129, 140, 170, 202, 208, 210	AR32.20-P-0230A
Remove/install torsion bar on front axle	MODEL 140	AR32.20-P-0300B
Removing and installing torsion bar on rear axle	MODEL 140	AR32.20-P-0315B
Removing and installing front shock absorber	MODEL 140, 170, 202, 208, 210	AR32.25-P-0105A
Remove/install rear shock absorber	MODEL 210 ... 129, 140, 170, 202, 203, 208, 209,	AR32.25-P-0110A
Checking shock absorber	MODEL 203, 208 129, 140, 163, 164, 168, 170, 202,, 209, 210, 211, 230, 251, 414 ...	AR32.25-P-0121A
Rear strut removal and installation	MODEL 140, 202, 203, 208, 210 ...	AR32.25-P-1016A
Checking hydraulic pump	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0510A
Rear suspension-control module - Operation check	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0520A
Testing pressure at rear axle level controller	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0530A
Rear hydraulic suspension pressure accumulator, removal and installation	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0620A
Emptying and filling pressure oil system	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0630A
Rear suspension-control module, removal and installation	MODEL 140, 202, 203, 208, 210 ...	AR32.30-P-0670A
Removing and installing front shock absorber/ADS	MODEL 140 as of 1.6.94, 210 with CODE (217a) Level control at rear axle with ADS	AR32.32-P-0605A
Removing and installing rear damper valves	MODEL 140 as of 1.6.94, 210 with CODE (217a) Level control at rear axle with ADS	AR32.32-P-0680A