On-Board Diagnostic - Instrument Cluster

• Foreword [Instrument Cluster]
  • Notes
  • Troubleshooting Procedure
  • Action for Non-repeatable Malfunction
• Active Command Modes Inspection [Instrument Cluster]
• Active Command Modes Table [Instrument Cluster]
• Clearing DTC [Instrument Cluster]
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC C1132-41; Malfunction Inside Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC Inspection [Instrument Cluster]
  • CMDTC Self Test
  • ODDTC Self Test
    • Notes
    • Snapshot Data
• DTC Table [Instrument Cluster]
• DTC U0001-88; U0010-88; U0100-00; U0101-00; U0104-00; U0121-00; U0128-00; U0131-00; U0140-00; U0142-00; U0151-00; U0156-00; U0182-00; U0214-00; U0232-00; U0235-00; U023A-00; Module Communication Errors
  • Notes
  • Diagnostic Procedure
• DTC U0300-00; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U0401-68; Error Signal Received From Pcm
  • Notes
  • Diagnostic Procedure
• DTC U0402-68; Error Signal Received From Transmission/Transaxle
  • Notes
  • Diagnostic Procedure
• DTC U0405-00; Error Signal Received From Radar Unit
  • Notes
  • Diagnostic Procedure
• DTC U0422-68; Error Signal Received From Front Body Control Module (FBCM)
  • Notes
  • Diagnostic Procedure
• DTC U0515-68; Error Signal Received From Start Stop Unit
  • Notes
  • Diagnostic Procedure
• DTC U0533-68; Error Signal Received From Blind Spot Monitoring (BSM) Control Module (LH)
  • Notes
  • Diagnostic Procedure
• DTC U053B-00; Error Signal Received From Forward Sensing Camera (FSC)
  • Notes
  • Diagnostic Procedure
• DTC U2005-86; Error Signal Received From Pcm
  • Notes
  • Diagnostic Procedure
• DTC U2013-13; Cluster Switch Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U2100-00; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U2105-02; Drive Selection Switch Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U2300-41; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U2300-51; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U2300-56; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U2300-57; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3000-41; Instrument Cluster Internal Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3003-16; Low Power Supply Voltage Input To Instrument Cluster
  • Notes
  • Diagnostic Procedure
• On-Board Diagnostic Wiring Diagram [Instrument Cluster]
• PID/Data Monitor Inspection [Instrument Cluster]
• PID/Data Monitor Table [Instrument Cluster]