DTC U0533-68; Error Signal Received From Blind Spot Monitoring (BSM) Control Module (LH): Notes

DETECTION CONDITION & POSSIBLE CAUSES

Description	Error signal received from blind spot monitoring (BSM) control module (LH)
Detection condition	Instrument cluster receives the error signals from the blind spot monitoring (BSM) control module (LH) for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe function	Not applicable
Possible cause	DTCs are stored in the blind spot monitoring (BSM) control module (LH). Blind spot monitoring (BSM) control module (LH) malfunction Instrument cluster malfunction
System wiring diagram	Not applicable