Symptom Chart
Symptom Chart: HUD
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| The adaptive cruise control with stop and go display (part of the advanced driver assist system) is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The HUD is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| The HUD setup menu does not display in the IPC or cannot be navigated | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| The HUD illumination does not increase or decrease | Refer to the Pinpoint Test | GO to Pinpoint Test C |
| The HUD does not display clearly, is distorted or cut off on the windshield | Refer to the Pinpoint Test | GO to Pinpoint Test D |
| The BLIS/ CTA indication does not display | Refer to the Pinpoint Test | GO to Pinpoint Test E |
| The DTE-low fuel indication, digital speedometer, clock or outside air temperature display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test F |
| The highway assist system display (part of the advanced driver assist system) is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| An infotainment menu (audio, navigation or phone) does not display or cannot be navigated | Refer to the Pinpoint Test | REFER to: Information and Entertainment System . |
| The lane centering aid display (part of the advanced driver assist system) in inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The lane keeping system display (part of the advanced driver assist system) is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The LH- RH turn/hazard signal display is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test G |
| The speed sign recognition display (part of the advanced driver assist system) is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The transmission gear display indication is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test I |
| The unit or language selection cannot be changed | Refer to the Pinpoint Test | GO to Pinpoint Test J |