LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Service Information (Convertible) >> Coolant >> Replacement [07/2020 - ] >> Procedure

Replacement [07/2020 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 2 [05/2023 - ]

  2. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH 

    Refer to PROCEDURE - Step 2 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 2 [05/2023 - ]

  3. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH 

    Refer to PROCEDURE - Step 1 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 1 [05/2023 - ]

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 3 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 3 [05/2023 - ]

  5. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 14 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 14 [05/2023 - ]

  6. REMOVE FRONT FENDER SEAL LH 

    Refer to PROCEDURE - Step 1

  7. REMOVE FRONT FENDER SEAL RH 

    Refer to PROCEDURE - Step 2

  8. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 17 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 17 [05/2023 - ]

  9. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 18 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 18 [05/2023 - ]

  10. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 19 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 19 [05/2023 - ]

  11. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 11

  12. ADD ENGINE COOLANT 

    Refer to PROCEDURE - Step 12

  13. INSPECT FOR COOLANT LEAK 

    Refer to PROCEDURE - Step 3

  14. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 138 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 141 [05/2023 - ]

  15. INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 140 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 143 [05/2023 - ]

  16. INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 139 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 142 [05/2023 - ]

  17. INSTALL FRONT FENDER SEAL RH 

    Refer to PROCEDURE - Step 21

  18. INSTALL FRONT FENDER SEAL LH 

    Refer to PROCEDURE - Step 22

  19. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 143 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 146 [05/2023 - ]

  20. INSTALL LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 8 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 8 [05/2023 - ]

  21. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH 

    Refer to PROCEDURE - Step 10 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 1 [05/2023 - ]

  22. INSTALL RADIATOR SUPPORT TO FRAME SEAL LH 

    Refer to PROCEDURE - Step 9 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 9 [05/2023 - ]

  23. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 147 [07/2020 - 05/2023] , or refer to PROCEDURE - Step 150 [05/2023 - ]

scientia non olet · About LEMON Manuals