Luggage Compartment Door: Reassembly

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LICENSE PLATE LIGHT ASSEMBLY LH (See INSTALLATION )
INSTALL LICENSE PLATE LIGHT ASSEMBLY RH
HINT

Use the same procedure for the RH side and LH side.
INSTALL LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY (See INSTALLATION )
INSTALL REAR LIGHT ASSEMBLY LH (See REASSEMBLY )
INSTALL REAR LIGHT ASSEMBLY RH
HINT

Use the same procedure for the RH side and LH side.
INSTALL TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System) (See INSTALLATION )
INSTALL LUGGAGE LOCK CONTROL CABLE CLAMP
1. Engage the clamp and install the luggage lock control cable clamp
INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY
1. Connect the luggage compartment door lock control cable
2. Install the luggage compartment door lock cylinder with the nut
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
3. Connect the connector and clamp
  
  Fig 2: Locating Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE KEY ELECTRICAL SWITCH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR REINFORCEMENT (See INSTALLATION )
INSTALL REAR SPOILER SUB-ASSEMBLY (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR COVER (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (See INSTALLATION )
INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP (See INSTALLATION )