LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> Rear Light Assembly >> Reassembly

Rear Light Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL REAR LIGHT SOCKET AND WIRE 
    1. Connect the connector and install the rear light socket and wire
    Fig 1: Locating Rear Light Socket And Wire
    G05320479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK UP LIGHT BULB 
    1. Install the back up light bulb to the rear light socket and wire
    2. Turn the back up light bulb and rear light socket and wire in the direction indicated by the arrow in the illustration and install them as a unit.
      Fig 2: Turning Back Up Light Bulb
      G05756570Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR LIGHT GASKET 
    1. Install a new rear light gasket
      Fig 3: Identifying Rear Light Gasket
      G05756566Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002