LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Upper Trim Panel Replacement (Except Cadillac)

Instrument Panel Upper Trim Panel Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Upper Trim Panel Assembly & Components
GM1689887Courtesy of GENERAL MOTORS CORP.
Instrument Panel Upper Trim Panel Replacement (Except Cadillac)

Callout Component Name

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the windshield pillar garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar .
  3. Remove the instrument panel upper trim panel with defroster nozzle. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Cadillac)  or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Except Cadillac) .
  4. Remove the instrument panel outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement (Cadillac)  or Instrument Panel Outer Trim Cover Replacement (Except Cadillac) .
  5. Remove the left instrument panel deflector. Refer to Deflector Replacement - Instrument Panel Air - Left (Cadillac) or Deflector Replacement - Instrument Panel Air - Left (Except Cadillac) .
  6. Remove the headlamp switch bezel assembly. Refer to Headlamp Switch Bezel Replacement .
  7. Remove the instrument panel cluster assembly. Refer to Instrument Cluster Replacement (Cadillac) or Instrument Cluster Replacement (Except Cadillac) .
  8. Remove the knee bolster assembly. Refer to Knee Bolster Replacement (Cadillac)  or Knee Bolster Replacement (Except Cadillac) .
  9. Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac)  or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .
  10. Remove the instrument panel accessory switch assembly. Refer to Accessory Switch Replacement (Cadillac) or Accessory Switch Replacement (Except Cadillac) .
  11. Remove the HVAC control module. Refer to HVAC Control Module Replacement .
  12. Remove the radio. Refer to Radio Replacement (Cadillac) or Radio Replacement (Except Cadillac) .
  13. Remove the instrument panel inflatable restraint. Refer to Inflatable Restraint Instrument Panel Module Replacement .
  14. Remove the right instrument panel deflector. Refer to Deflector Replacement - Instrument Panel Air - Center (Cadillac) or Deflector Replacement - Instrument Panel Air - Center (Except Cadillac) .
  15. Remove the instrument panel compartment door. Refer to Instrument Panel Compartment Door Replacement (Cadillac)  or Instrument Panel Compartment Door Replacement (Except Cadillac) .
  16. Remove the instrument panel access hole cover panel. Refer to Instrument Panel Compartment Access Hole Cover Replacement (Cadillac)  or Instrument Panel Compartment Access Hole Cover Replacement (Except Cadillac) .
1 Instrument Panel Upper Trim Panel Bolts (Qty: 4)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)

2 Instrument Panel Upper Trim Panel Screws (Qty: 18)

Tighten:  2 N.m (18 lb in)

3 Instrument Panel Upper Trim Panel Assembly
Tip: 
  1. Prior to removal of the trim panel from the carrier assembly, note the routing of the wiring to aid in reassembly.
  2. Disconnect electrical connections.
  3. With the aid of an assistant, remove the trim panel from the vehicle.