LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac)

Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Center Trim Plate & Clips
GM1673760Courtesy of GENERAL MOTORS CORP.
Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac)

Callout Component Name
1 Instrument Panel Center Trim Plate
Tip: 
  1. Use a flat-bladed plastic trim tool in order to release the retainer clips securing the trim plate to the instrument panel.
  2. Disconnect the electrical connections.
2 Retainer Clips (Qty: 7)