LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Instrument Panel System Displays And Gauges) >> Repair Instructions >> Instrument Cluster Replacement (Except Cadillac)

Instrument Cluster Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Cluster Assembly & Screws
GM1680116Courtesy of GENERAL MOTORS CORP.
Instrument Cluster Replacement (Except Cadillac)

Callout Component Name
Preliminary Procedure: 
Remove the instrument panel cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Cadillac) or Trim Panel Replacement - Instrument Panel (I/P) Cluster (Except Cadillac) .
1 Instrument Panel Cluster Screws (Qty: 4)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Instrument Panel Cluster Assembly
Tip:  A replacement cluster must be programmed. Refer to Control Module References .