Knee Bolster Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Knee Bolster Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the park brake release handle. Refer to Park Brake Release Handle Assembly Replacement .
1	Left Outer Trim Cover Tip: Refer to Instrument Panel Outer Trim Cover Replacement (Cadillac) or Instrument Panel Outer Trim Cover Replacement (Except Cadillac) .
2	Knee Bolster Assembly Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
3	Knee Bolster Assembly
4	Retainer Clips (Qty: 4)