Rear Seat Cushion Frame Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Cushion Frame & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Unlatch the rear seat cushion and fold forward. Remove the rear seat cushion trim panel. Refer to Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench) .
1	Rear Seat Cushion Cover and Pad Refer to Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) .
2	Rear Seat Riser Front Bracket Bolt (Qty: 5) Tighten: 9 N.m (80 lb in)
3	Rear Seat Cushion Frame