Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Cushion Pad & Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Unlatch the rear seat cushion and fold forward. Remove the rear seat cushion trim panel. Refer to Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench) .
1	Rear Seat Cushion Cover Tip: Remove the seat cushion cover and pad as an assembly and then separate if needed.
2	Rear Seat Cushion Pad

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Unlatch the rear seat cushion and fold forward.
Remove the rear seat cushion trim panel. Refer to Seat Cushion Trim Panel Replacement - Rear No.1 (Avalanche/Escalade EXT) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Bucket) or Seat Cushion Trim Panel Replacement - Rear No.1 (Tahoe/Yukon/Escalade with Split Bench) .

Rear Seat Cushion Cover
Tip: Remove the seat cushion cover and pad as an assembly and then separate if needed.

Rear Seat Cushion Pad