Radiator Support Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Support

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , Front Bumper Fascia Replacement (Z71) . Remove the grille support. Refer to Radiator Grille Reinforcement Support Replacement . Remove the front fascia bracket. Refer to Front Upper Fascia Support Bracket Replacement . Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement . Remove the radiator. Refer to Radiator Replacement (Non HP2) , Radiator Replacement (HP2) . Remove the A/C condenser. Refer to Air Conditioning Condenser Replacement (Gas) . Remove the fender bolts. Refer to Front Fender Replacement - Left Side , and Front Fender Replacement - Right Side (Non Hybrid) , Front Fender Replacement - Right Side (Hybrid) .
1	Radiator Support Mount Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 70 N.m (52 lb ft)
2	Radiator Support Mount Bolt (Qty: 2) Tighten 70 N.m (52 lb ft)
3	Radiator Support