Front Upper Fascia Support Bracket Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Front Upper Fascia Support Bracket Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , Front Bumper Fascia Replacement (Z71) . |
|
| 1 | Front Upper Fascia Support Bracket Bolt (Qty: 6)
CAUTION:
Refer to Fastener Caution . Tighten 7 N.m (62 lb in) |
| 2 | Front Upper Fascia Support Bracket Assembly TIP: Disconnect the wiring harness retainer from each end if equipped. |