Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the radiator assembly (1) to the vehicle.
- Install the engine coolant fan shroud (2) to the radiator. Refer to Engine Coolant Fan Shroud Replacement (LTG without V03) Engine Coolant Fan Shroud Replacement (LTG with VO3) .
- Install the radiator upper brackets (2). Refer to Radiator Upper Bracket Replacement (LTG, LGX) .
- Install the radiator outlet hose (2) to the radiator. Refer to Radiator Outlet Hose Replacement (LTG without V03) Radiator Outlet Hose Replacement (LTG with V03) .
- Install the radiator inlet hose (2) to the radiator. Refer to Radiator Inlet Hose Replacement (LTG) .
- Install the radiator surge tank inlet hose (2) to the radiator. Refer to Radiator Surge Tank Inlet Hose Replacement (LTG) .
- Install the radiator air lower baffle and deflector to the vehicle. Refer Radiator Air Lower Baffle and Deflector Replacement (LTG) .
- Fill the engine cooling system. Refer to Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716) .
- Check the cooling system for leaks. Refer to Cooling System Leak Testing .