LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Inlet Hose Replacement (LTG)

Radiator Surge Tank Inlet Hose Replacement (LTG)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Surge Tank Inlet Hose (LTG)
GM2873265Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716) .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement (Sedan)Front Compartment Front Sight Shield Replacement (Coupe) .
1 Radiator Surge Tank Inlet Hose Clamp (Qty: 3)
Procedure 
Reposition the radiator surge tank inlet hose clamps using BO-38185  Hose Clamp Pliers.
Special Tools 
BO-38185  Hose Clamp Pliers
For equivalent regional tools, refer to Special Tools .
2 Radiator Surge Tank Inlet Hose

Procedure

  1. Fill coolant to the proper level. Refer to Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716) .
  2. Inspect cooling system for leaks. Refer to Cooling System Leak Testing .
scientia non olet · About LEMON Manuals