Front Bumper Fascia Replacement (Acadia)

Fig 1: Identifying Front Bumper Fascia & Components (Acadia)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement (Traverse) , Front Compartment Sight Shields Replacement (Acadia) , Front Compartment Sight Shields Replacement (Enclave) . Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Enclave - Acadia) , Front Wheelhouse Front Liner Replacement (Traverse) .
1	Front Fascia Screw (Qty: 2) CAUTION: Refer to Fastener Caution . TIP: Reach underneath the wheelhouse to access the bolts. Tighten 2 N.m (18 lb in)
2	Front Fascia Retainer (Qty: 6)
3	Front Fascia Bracket Screw (Qty: 2) Tighten 2 N.m (18 lb in)
4	Front Fascia Procedure Drill out the license plate bracket rivets, if equipped. Disconnect any electrical connectors. Transfer parts as needed. Pull forward to remove the front bumper fascia.