LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Parking and Front Fog Lamp Bracket Replacement (Enclave) >> Removal Procedure

Removal Procedure

  1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Enclave - Acadia) , Front Wheelhouse Front Liner Replacement (Traverse) .
  2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Enclave) , Front Bumper Fascia Replacement (Acadia) , Front Bumper Fascia Replacement (Traverse) .
    3. Fig 1: Identifying Lower Front Bumper Fascia Bracket Screw
    GM1870654Courtesy of GENERAL MOTORS CORP.
  3. Remove the lower front bumper fascia to bracket screw (1).
  4. Remove the 3 upper and 3 lower screws (2).
  5. Remove the lower push lock retainer (4) and bolt (3).
  6. Release the two fog lamp bracket tabs from the front bumper fascia, push in order to release the tabs.
    7. Fig 2: Identifying Parking & Front Fog Lamp Bracket & Front Bumper Fascia
    GM1870752Courtesy of GENERAL MOTORS CORP.
  7. Remove the parking and front fog lamp bracket (1) from the front bumper fascia (2).
scientia non olet · About LEMON Manuals