LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Parking and Front Fog Lamp Bracket Replacement (Enclave) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Parking & Front Fog Lamp Bracket & Front Bumper Fascia
    GM1870752Courtesy of GENERAL MOTORS CORP.
  1. Position and align the parking and front fog lamp bracket (1) to inside the front bumper fascia (2).
  2. Secure the locking tabs to the front bumper fascia.
    3. Fig 2: Identifying Lower Front Bumper Fascia Bracket Screw
    GM1870654Courtesy of GENERAL MOTORS CORP.
    CAUTION:

    Refer to Fastener Caution .

  3. Install the lower push lock retainer (4) and bolt (3).
  4. Install the 3 upper and 3 lower screws (2).
  5. Install the front bumper lower fascia to bracket screw (1) and tighten to 2.5 N.m (22 lb in).
  6. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Enclave) , Front Bumper Fascia Replacement (Acadia) , Front Bumper Fascia Replacement (Traverse) .
  7. Install the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Enclave - Acadia) , Front Wheelhouse Front Liner Replacement (Traverse) .
scientia non olet · About LEMON Manuals