Rear Seat Back Cushion Frame Replacement (With 40 Percent Seat)

Fig 1: Identifying Rear Seat Back Cushion Frame (With 40 Percent Seat)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat . Refer to Rear Seat Replacement (With 40 Percent Seat) , Rear Seat Replacement (With 60 Percent Seat) . Remove the rear seat cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (with 60 Percent Seat) , Rear Seat Back Cushion Cover and Pad Replacement (with 40 Percent Seat without Armrest) , Rear Seat Back Cushion Cover and Pad Replacement (with 40 Percent Seat with Armrest) . Remove the rear seat latch release handle assembly. Refer to Rear Seat Back Cushion Latch Release Handle Replacement (With 60 Percent Seat) , Rear Seat Back Cushion Latch Release Handle Replacement (with 40 Percent Seat) . Remove the rear seat back cushion stowage latch actuator. Refer to Rear Seat Back Cushion Stowage Latch Actuator Replacement (With 40 Percent Seat) , Rear Seat Back Cushion Stowage Latch Actuator Replacement (With 60 Percent Seat) .
1	Rear Seat Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . TIP: Use a grease pencil or marker to mark the location of the bolts for installation to ensure correct alignment of the seat back. Tighten 45 N.m (33 lb ft)
2	Rear Seat Bolt TIP: Use a grease pencil or marker to mark the location of the bolts for installation to ensure correct alignment of the seat back. Tighten 28 N.m (21 lb ft)
3	Rear Seat Recliner Bolt TIP: Use a grease pencil or marker to mark the location of the bolts for installation to ensure correct alignment of the seat back. Tighten 28 N.m (21 lb ft)
4	Rear Seat Back Frame