Rear Seat Back Cushion Cover and Pad Replacement (with 40 Percent Seat without Armrest)

Preliminary Procedures

1. Remove the rear seat . Refer to Rear Seat Replacement (With 40 Percent Seat) , Rear Seat Replacement (With 60 Percent Seat) .
2. Remove the rear seat latch release handle. Refer to Rear Seat Latch Release Handle Replacement (With 40 Percent Seat) , Rear Seat Latch Release Handle Replacement (With 60 Percent Seat) .
3. Remove the rear seat latch release strap outer bezel. Refer to Rear Seat Latch Release Strap Bezel Replacement - Outer .
4. Remove the rear seat latch covers. Refer to Rear Seat Back Cushion Latch Cover Replacement - Inner , or Rear Seat Back Cushion Latch Cover Replacement - Outer (with 60 Percent Seat) , Rear Seat Back Cushion Latch Cover Replacement - Outer (with 40 Percent Seat) .
5. Remove the rear seat inner recliner cover. Refer to Rear Seat Recliner Inner Finish Cover Replacement - Upper (with 40 Percent Seat) .
6. Remove the rear seat head restraint. Refer to Rear Seat Head Restraint Replacement (with 60 Percent Seat) , Rear Seat Head Restraint Replacement (with 40 Percent Seat) .
7. Remove the rear seat head restraint guides. Refer to Rear Seat Head Restraint Guide Replacement (with 60 Percent Seat) , Rear Seat Head Restraint Guide Replacement (with 40 Percent Seat) .

Procedure

1. Unzip the seat cushion cover.
2. Disconnect the seat back cover j-channels from the seat back frame.
3. Remove the hog rings from the bottom of the seat back cover.
4. Remove the rear seat back cushion cover and pad as an assembly.

Procedure

1. Disengage the hog rings retaining the cover to the pad.
2. Separate the seat back cushion cover from the pad.