LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Latch Release Handle Replacement (with 40 Percent Seat)

Rear Seat Back Cushion Latch Release Handle Replacement (with 40 Percent Seat)

Fig 1: View Of Rear Seat Back Cushion Latch Release Handle (With 40 Percent Seat)
GM1850528Courtesy of GENERAL MOTORS CORP.
Rear Seat Back Cushion Latch Release Handle Replacement (with 40 Percent Seat)

Callout Component Name

Preliminary Procedures

  1. Remove the rear seat . Refer to Rear Seat Replacement (With 40 Percent Seat) , Rear Seat Replacement (With 60 Percent Seat) .
  2. Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (with 60 Percent Seat) , Rear Seat Back Cushion Cover and Pad Replacement (with 40 Percent Seat without Armrest) , Rear Seat Back Cushion Cover and Pad Replacement (with 40 Percent Seat with Armrest) .
1 Rear Seat Latch Release Handle Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
5 N.m (44 lb in)
2 Rear Seat Latch Release Handle Assembly

Procedure

  • Disconnect the cable and note the cable routing for installation.
  • The cable must be routed under the rear seat back stowage latch housing.
  • The white area of the cable must fit into the seat back frame hooks.
scientia non olet · About LEMON Manuals