LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Acadia SLT, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Side Door Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Exploded View Of Door Hinge
    GM1843757Courtesy of GENERAL MOTORS CORP.
  1. Remove the power window switch. Refer to Rear Side Door Window Switch Replacement (OUTLOOK) or Rear Side Door Window Switch Replacement (Acadia) or Rear Side Door Window Switch Replacement (Enclave) .
  2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) .
  3. Remove the inner window belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  4. Remove the outer window belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  5. Remove the upper sealing strip. Refer to Rear Door Upper Sealing Strip Replacement .
  6. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  7. Remove the speaker. Refer to Radio Rear Side Door Speaker Replacement .
  8. Remove the window. Refer to Rear Side Door Window Replacement .
  9. Remove the stationary window and run channel assembly. Refer to Rear Side Door Window Channel Replacement .
  10. Remove the window regulator. Refer to Rear Side Door Window Regulator Replacement .
  11. Remove the side door SIR sensor. Refer to Inflatable Restraint Side Impact Sensor Replacement - Front or Inflatable Restraint Side Impact Sensor Replacement - Rear .
  12. Remove the door latch assembly. Refer to Rear Side Door Latch Replacement .
  13. Remove the outside door handle. Refer to Rear Side Door Outside Handle Replacement .
  14. Remove the bolts (1, 3) that retain the door to the hinge plates.
  15. With the aid of an assistant, remove the door from the vehicle.