Rear Side Door Window Switch Replacement (Outlook)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) . |
|
| 1 | Rear Switch Plate Screw
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Rear Switch Plate Assembly Tip: Use a flat-bladed tool to pry switch plate from door trim. |
| 3 | Rear Side Door Window Switch Assembly Tip: Disconnect electrical connectors. |