Rear Door Window Belt Inner Sealing Strip Replacement

Fig 1: View Of Rear Door Window Belt Inner Sealing Strip

GM1719002

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedure:
Remove rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) .

1

Rear Side Door Inner Window Sealing Strip

Procedures

Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange.
Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.