Rear Door Window Belt Outer Sealing Strip Replacement

Fig 1: View Of Rear Door Window Belt Outer Sealing Strip

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Side Door Outer Sealing Strip Screw NOTE: Refer to Fastener Notice . Tighten: 1.5 N.m (13 lb in)
2	Rear Side Door Outer Sealing Strip Procedure Remove by lifting up on seal starting at the rear and working forward. When re-installing, align outer seal fastener location with hole in door structure and outer panel retaining tabs. Start at rear of belt seal, push down onto flange until fully seated.

Callout

Component Name

Rear Side Door Outer Sealing Strip Screw

NOTE: Refer to Fastener Notice .

Tighten: 1.5 N.m (13 lb in)

Rear Side Door Outer Sealing Strip

Procedure

Remove by lifting up on seal starting at the rear and working forward.
When re-installing, align outer seal fastener location with hole in door structure and outer panel retaining tabs.
Start at rear of belt seal, push down onto flange until fully seated.