Section 95 (Engine Cooling System - 1.5L ECOBOOST (118KW/160PS) - I4)

• Specifications
  • Specifications
    • Lubricants, Fluids, Sealants and Adhesives
    • Cooling System Pressure
    • Thermostat Opening Temperatures
• Description And Operation
  • Engine Cooling - Component Location
  • Engine Cooling - System Operation and Component Description
    • System Operation
      • Notes
      • Fail Safe Cooling
    • Component Description
      • Transmission Fluid Heater Coolant Control Valve
      • Cabin Coolant Heater Pump
• Diagnosis And Testing
  • Engine Cooling
    • Notes
    • PCM DTC Chart
    • Inspection and Verification
    • Symptom Chart
    • Pinpoint Tests
      • PINPOINT TEST A : Loss of Coolant
        • Notes
        • PINPOINT TEST A : Loss of Coolant
      • PINPOINT TEST B : The Engine Overheats
        • Notes
        • PINPOINT TEST B : The Engine Overheats
      • PINPOINT TEST C : The Engine Does Not Reach Normal Operating Temperature
        • Notes
        • PINPOINT TEST C : The Engine Does Not Reach Normal Operating Temperature
    • Component Tests
      • Cooling System Pressure Test
      • Thermostat
      • Thermostat Visual Inspection
      • Radiator Leak Test, Removed From Vehicle
      • Charge Air Cooler Radiator Leak Test, Removed From Vehicle
• General Procedures
  • Cooling System Draining, Vacuum Filling and Bleeding
  • Cooling System Flushing
• Removal And Installation
  • Block Heater
    • Removal
    • Installation
  • Coolant Pump
    • Notes
    • Removal
    • Installation
  • Cooling Fan Motor and Shroud
    • Notes
    • Removal
    • Installation
  • Degas Bottle
    • Notes
    • Removal
    • Installation
  • Radiator
    • Notes
    • Removal
    • Installation
  • Transmission Fluid Heater Coolant Control Valve
    • Notes
    • Removal
    • Installation
  • Thermostat Housing
    • Notes
    • Removal
    • Installation