Symptom Chart: Warning Chimes

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices.

Condition	Possible Sources	Actions
All the chimes are inoperative	IPC	GO to PINPOINT TEST A
The Belt-Minder® feature does not operate	Refer to PINPOINT TEST	GO to PINPOINT TEST AM
The chime sounds when the driver door is ajar (no key in ignition and headlamps off)	Refer to PINPOINT TEST	GO to PINPOINT TEST AI
The door ajar warning chime is inoperative	Wiring, terminals or connectors BCM IPC	OPEN the driver door and OBSERVE the door ajar warning indicator. If the door ajar warning indicator does not operate correctly, GO to PINPOINT TEST O If the door ajar warning indicator operates correctly, INSTALL a new IPC . REFER to: INSTRUMENT PANEL CLUSTER (IPC) .
The headlamps on warning chime is inoperative	Refer to PINPOINT TEST	GO to PINPOINT TEST AJ
The key-in-ignition warning chime is inoperative (without push button start)	Refer to PINPOINT TEST	GO to PINPOINT TEST AK
The parking brake warning chime is inoperative	Refer to PINPOINT TEST	GO to PINPOINT TEST AL
The safety belt warning chime is inoperative	Refer to PINPOINT TEST	GO to PINPOINT TEST AM
The turn signal/hazard on tone is inoperative	Turn signal indicator concern IPC	VERIFY that the turn signal indicator operates correctly. If the turn signal indicator does not operate correctly, GO to PINPOINT TEST R If the turn signal indicator operates correctly, INSTALL a new IPC . REFER to: INSTRUMENT PANEL CLUSTER (IPC) .