LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus Electric >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation, Message Center, And Warning Chimes -- Electric >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> DTC Chart: IPC

DTC Chart: IPC

Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: DIAGNOSTIC METHODS .

DTC CHART - IPC

DTC Description Action
C1D22:09 Steering Wheel Switch Right Module: Component Failure REFER to: INFORMATION AND ENTERTAINMENT SYSTEM .
C1D22:11 Steering Wheel Switch Right Module: Circuit Short To Ground REFER to: INFORMATION AND ENTERTAINMENT SYSTEM .
C1D22:12 Steering Wheel Switch Right Module: Circuit Short To Battery REFER to: INFORMATION AND ENTERTAINMENT SYSTEM .
C2003:09 Steering Wheel Switch Left Module: Component Failure GO to PINPOINT TEST R 
C2003:11 Steering Wheel Switch Left Module: Circuit Short To Ground GO to PINPOINT TEST R 
C2003:12 Steering Wheel Switch Left Module: Circuit Short To Battery GO to PINPOINT TEST R 
P1534:01 Restraint Deployment Indicator Circuit: General Electrical Failure
P1706:00 High Vehicle Speed Observed in Park: No Sub Type Information GO to PINPOINT TEST L 
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to PINPOINT TEST AJ 
U0146:00 Lost Communication With Gateway "A": No Sub Type Information GO to PINPOINT TEST AK 
U0164:00 Lost Communication With HVAC Control Module: No Sub Type Information GO to PINPOINT TEST AL 
U0214:00 Lost Communication With Remote Function Actuation: No Sub Type Information GO to PINPOINT TEST AM 
U0293:00 Lost Communication With Hybrid/EV Powertrain Control Module: No Sub Type Information GO to PINPOINT TEST AN 
U0401:81 Invalid Data Received from ECM/PCM A: Invalid Serial Data Received This DTC  sets when the IPC  receives invalid network data for temperature and vehicle speed from the PCM  . RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM  and other modules on the network.
REFER to: ELECTRIC POWERTRAIN CONTROL .
U0401:82 Invalid Data Received from ECM/PCM A: Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AN 
U0412:82 Invalid Data Received From Battery Energy Control Module A: Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AO 
U0412:86 Invalid Data Received From Battery Energy Control Module A: Signal Invalid This DTC  sets when the IPC  receives invalid network data for the high voltage battery gauge. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BECM  and other modules on the network.
REFER to: HIGH VOLTAGE BATTERY CHARGING SYSTEM .
U0415:81 Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: Invalid Serial Data Received This DTC  sets when the IPC  receives invalid network data for the vehicle speed data. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the ABS  module and other modules on the network.
REFER to: ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .
U0415:82 Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AP 
U0420:82 Invalid Data Received From Power Steering Control Module: Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AQ 
U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information
  • NOTE: When DTC  sets, the TPMS  indicator flashes for 75 seconds then turns on.

    This DTC  sets when the IPC  receives invalid network data for the TPMS  data. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BCM  and other modules on the network.

    REFER to: BODY CONTROL MODULE (BCM) .
U0424:00 Invalid Data Received From HVAC Control Module: No Sub Type Information This DTC  sets when the IPC  receives unknown outside air temperature data from the HVAC module. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM  and the HVAC module.
REFER to: CLIMATE CONTROL SYSTEM .
REFER to: ELECTRIC POWERTRAIN CONTROL .
U0424:81 Invalid Data Received From HVAC Control Module: Invalid Serial Data Received This DTC  sets when the IPC  receives no data for the outside air temperature from the HVAC module. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM  and the HVAC module.
REFER to: CLIMATE CONTROL SYSTEM .
REFER to: ELECTRIC POWERTRAIN CONTROL .
U0424:82 Invalid Data Received From HVAC Control Module: Alive/Sequence Counter Incorrect/Not Updated This DTC  sets when the IPC  does not receive updated outside air temperature data from the HVAC module. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM  and the HVAC module.
REFER to: CLIMATE CONTROL SYSTEM .
REFER to: ELECTRIC POWERTRAIN CONTROL .
U0452:81 Invalid Data Received From Restraints Control Module: Invalid Serial Data Received This DTC  sets when the IPC  receives invalid safety belt data from the RCM  . RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the RCM  .
REFER to: AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - VEHICLES BUILT FROM: 11-JUNE-2012 .
U0452:82 Invalid Data Received From Restraints Control Module: Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AR 
U045A:82 Invalid Data Received From Parking Assist Control Module "A": Alive/Sequence Counter Incorrect/Not Updated GO to PINPOINT TEST AS 
U046B:86 Invalid Data Received From Global Positioning System Module: Signal Invalid This DTC  sets when the IPC  receives invalid compass data from the GPSM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the GPSM  .
REFER to: INFORMATION AND ENTERTAINMENT SYSTEM .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK the vehicle service history for recent service actions related to this module. This DTC  sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure as directed by the scan tool.
REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data.
U3000:41 Control Module: General Checksum Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:41 is retrieved again, INSTALL a new IPC  .
REFER to: Instrument Panel Cluster (IPC) .
U3000:42 Control Module: General Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:42 is retrieved again, INSTALL a new IPC  .
REFER to: Instrument Panel Cluster (IPC) .
U3000:44 Control Module: Data Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:44 is retrieved again, INSTALL a new IPC  .
REFER to: Instrument Panel Cluster (IPC) .
U3000:46 Control Module: Calibration/Parameter Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:46 is retrieved again, INSTALL a new IPC  .
REFER to: Instrument Panel Cluster (IPC) .
U3000:54 Control Module: Missing Calibration CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC  U3000:54 is retrieved again, INSTALL a new IPC  .
REFER to: Instrument Panel Cluster (IPC) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AT 
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AU 
U300A:64 Ignition Switch: Signal Plausibility Failure DTC  U300A:64 sets in continuous memory when the IPC  detects a messaged START input for 15 seconds or longer. Once the fault condition is detected, the IPC  operates with limited functionality for 15 seconds then returns to full functionality. Diagnose the ignition start circuit to the BCM  .
REFER to: STEERING WHEEL AND COLUMN ELECTRICAL COMPONENTS .
scientia non olet · About LEMON Manuals