Instrument Cluster Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1202 | Fuel Sender Circuit Open | Instrument Cluster | Go To PINPOINT TEST U: INCORRECT FUEL GAUGE INDICATION . |
| B1204 | Fuel Sender Circuit Short to Ground | Instrument Cluster | Go To PINPOINT TEST U: INCORRECT FUEL GAUGE INDICATION . |
| B1317 | Battery Voltage High | Instrument Cluster | Go To PINPOINT TEST G: THE CHARGE SYSTEM WARNING INDICATOR IS NEVER ON . |
| B1318 | Battery Voltage Low | Instrument Cluster | Go To PINPOINT TEST G: THE CHARGE SYSTEM WARNING INDICATOR IS NEVER ON . |
| B1342 | ECU is Defective | Instrument cluster | CLEAR all DTCs. RETRIEVE the DTCs. If the DTC B1342 is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2143 | NVM Memory Failure | Instrument cluster | Go To PINPOINT TEST E: THE SPEEDOMETER/ODOMETER IS INOPERATIVE . |
| B2207 | ECU ROM Checksum | Instrument cluster | CLEAR all DTCs. RETRIEVE the DTCs. If the DTC B2207 is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2477 | Module Configuration Failure | Instrument cluster | REFER to MODULE CONFIGURATION to continue diagnosis of module configuration fault. |
| B2675 | Trip Reset Button Stuck | Instrument cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| C1221 | ABS Warning Lamp Output Circuit Short to Ground | Instrument cluster | Go To PINPOINT TEST H: THE ANTI-LOCK BRAKE SYSTEM (ABS) WARNING INDICATOR IS NEVER/ALWAYS ON . |
| C1226 | Brake Warning Lamp Output Circuit Short to Ground | Instrument cluster | Go To PINPOINT TEST P: THE BRAKE WARNING INDICATOR IS NEVER/ALWAYS ON . |
| C2784 | RAM Checksum Failure | Instrument cluster | CLEAR all DTCs. RETRIEVE the DTCs. If the DTC C2784 is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| P0117 | Engine Coolant Temperature Circuit Low Input | Instrument cluster | Go To PINPOINT TEST B: INCORRECT TEMPERATURE GAUGE INDICATION . |
| P0118 | Engine Coolant Temperature Circuit High Input | Instrument cluster | Go To PINPOINT TEST B: INCORRECT TEMPERATURE GAUGE INDICATION . |