Removal Procedure
WARNING: This page is about a different variant/trim than selected.
Positive Crankcase Ventilation Tube (1) - Remove - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement
- Ignition Coil - Remove [4x] - Ignition Coil Replacement
Wiring Harness Retainer (1) - Remove
- Wiring Harness (2) - Reposition away
- Vacuum Pump - Remove - Vacuum Pump Replacement
Camshaft Cover Heat Shield (2) - Remove - Camshaft Cover Heat Shield Replacement
- Oil Level Indicator - Remove
Engine Coolant Air Bleed Pipe (2) - Remove - Engine Coolant Air Bleed Pipe Replacement (LCV)
- Camshaft Position Actuator Solenoid Valve - Intake - Remove - Camshaft Position Actuator Intake Solenoid Valve Replacement
- Camshaft Position Actuator Solenoid Valve - Exhaust - Remove - Camshaft Position Actuator Exhaust Solenoid Valve Replacement
Camshaft Cover (4) - Remove - Camshaft Cover Removal
- If reinstalling the camshaft cover (2), clean and inspect as needed. Camshaft Cover Cleaning and Inspection