Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Transfer components as necessary.
Front Fender(1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Fender Bolt(1) - Install and tighten[2x]25N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Front Fender Rivet(1) - Install[2x]
Courtesy of GENERAL MOTORS COMPANY

Front Fender Front Lower Reinforcement Extension (1) - Install - Front Fender Front Lower Reinforcement Extension Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Fender Upper Rear Molding(1) - Install - Front Fender Upper Rear Molding Replacement
Courtesy of GENERAL MOTORS COMPANY

Hood(1) - Install - Hood Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel(1) - Install - Air Inlet Grille Panel Replacement (Left Side)Air Inlet Grille Panel Replacement (Right Side)
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle(1) - Install - Radiator Air Upper Baffle Replacement (LWN)Radiator Air Upper Baffle Replacement (LV1)Radiator Air Upper Baffle Replacement (L96, LC8)