Removal Procedure

Disable the SIR system. Refer to SIR Disabling and Enabling .
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Care should be taken to ensure that the floor console fasteners are kept separate from the carrier fasteners.

Remove the front floor console (3), if equipped. Refer to Front Floor Console Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument panel center compartment (3), if equipped. Refer to Instrument Panel Center Compartment Replacement (Chevrolet / GMC)
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument panel upper trim panel (3). Refer to Instrument Panel Upper Trim Panel Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove both instrument panel wiring harness junction blocks (1). Refer to Instrument Panel Wiring Harness Junction Block Replacement .
Courtesy of GENERAL MOTORS COMPANY

Remove the steering column (3). Refer to Steering Column Replacement (N33, N37)Steering Column Replacement (N38) .
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument cluster (2). Refer to Instrument Cluster Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove the head-up display (3), if equipped. Refer to Head-Up Display Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove the radio (1). Refer to Radio Replacement (Chevrolet / GMC with NGI)Radio Replacement (Chevrolet/GMC with IOB) .
Courtesy of GENERAL MOTORS COMPANY

Remove the disc player (2). Refer to Disc Player Replacement .
Courtesy of GENERAL MOTORS COMPANY

Remove the left and right radio speakers (2). Refer to Radio Speaker Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove the navigation signal splitter (1). Refer to Navigation Signal Splitter Replacement (Chevrolet / GMC) .
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument carrier fasteners (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument carrier fasteners (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument panel center and outer air outlet fasteners (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument panel upper trim panel fasteners (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the instrument carrier fasteners (1).
Remove the instrument panel carrier nut (2).
Courtesy of GENERAL MOTORS COMPANY

Note location and routing of the instrument panel wiring harness prior to removal of the instrument panel carrier to ensure proper reinstallation.
Remove the data link connector fasteners and position the data link connector out of the way.
Remove the right and left front floor flood lamps. Refer to Front Floor Flood Lamp Replacement (Right Side)Front Floor Flood Lamp Replacement (Left Side) .
Disconnect the wiring harness from the instrument panel carrier.
With the aid of an assistant, remove the instrument panel carrier (1) from the vehicle.