LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Replacement (Except Cadillac)

Front Floor Console Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Floor Console
GM1693900Courtesy of GENERAL MOTORS CORP.
Front Floor Console Replacement (Except Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the 2 front seats. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
  2. Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (Except Cadillac) , Front Floor Console Side Trim Panel Replacement - Right Side (Cadillac) , and Front Floor Console Side Trim Panel Replacement - Left Side (Except Cadillac) , Front Floor Console Side Trim Panel Replacement - Left Side (Cadillac) .
  3. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Except Cadillac) , Floor Console Bezel Replacement (Cadillac) .
  4. Disconnect the electrical connectors to the console assembly.
1 Front Floor Console Assembly
  1. With the aid of an assistant, remove the console from the vehicle.
  2. When replacing the console assembly, transfer all the necessary components.