LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Floor Console Bezel Replacement (Cadillac)

Floor Console Bezel Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Floor Console Bezel (Cadillac)
GM1705094Courtesy of GENERAL MOTORS CORP.
Floor Console Bezel Replacement (Cadillac)

Callout Component Name
CAUTION:

To prevent component damage, DO NOT use metal tools to remove the trim.
1 Front Floor Console Bezel Assembly
  1. Use a flat-bladed plastic trim tool to carefully release the retainer clips along the rear edge of the bezel.
  2. Disconnect the electrical connections.
  3. Lift the bezel out of the console assembly.
2 Retainer Clip (Qty: 4)
scientia non olet · About LEMON Manuals