Daytime Running Lamp Replacement (ZL1)

Preliminary Procedures

1. Remove the front wheel liner. Refer to Front Wheelhouse Liner Replacement (Base, RS, SS) , Front Wheelhouse Liner Replacement (ZL1) .
2. Remove the fog lamp bezel. Refer to Front Fog Lamp Bezel Replacement , Front Fog Lamp Bezel Replacement (ZL1) .

Procedure

1. Disconnect the electrical connector from the daytime running lamp bulb socket.
2. Using a 10 mm, six point socket, push forward and release each of the daytime running lamp tabs from the front bumper fascia opening.
3. Position and press the daytime running lamp back into the front bumper fascia opening until all three tabs are secured to the front bumper fascia.