Driver or Passenger Seat Back Cushion Frame Replacement

Fig 1: Front Seat Back Cushion Frame And Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Driver or Passenger Seat Replacement . Remove the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Manual Height Adjuster) , Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (with Power Height Adjuster) . Remove the front seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement . Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement . Remove the inflatable restraint side impact module. Refer to Driver or Passenger Seat Side Inflatable Restraint Module Replacement .
1	Driver or Passenger Seat Back Cushion Frame Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 35 N.m (26 lb ft)
2	Driver or Passenger Seat Back Cushion Frame Procedure Disconnect electrical connectors as needed. If replacing with a new front seat back cushion frame, transfer components as necessary.

Callout

Component Name

Preliminary Procedure

Driver or Passenger Seat Back Cushion Frame Bolt (Qty: 4)

CAUTION:

Tighten
35 N.m (26 lb ft)

Driver or Passenger Seat Back Cushion Frame

Procedure

Disconnect electrical connectors as needed.
If replacing with a new front seat back cushion frame, transfer components as necessary.