System Tests: Notes
CAUTION:
Static electricity can destroy integrated circuits in instrument cluster and VSS calibrator. Before servicing these components, ground yourself and work area to discharge static electricity.
NOTE:
Unless otherwise specified, make all voltage and resistance measurements with a Digital Volt-Ohmmeter (DVOM) having an input impedance of 10 megohms or greater.
SYMPTOM INDEX
| Symptom | Perform Test | |||
|---|---|---|---|---|
| Instrument Panel | ||||
| Brake Warning Indicator Always On | A | |||
| Charge Warning Indicator Malfunctioning | B | |||
| Fuel Gauge Inoperative Or Inaccurate | C | |||
| Odometer Inaccurate Or Inoperative | D | |||
| PRNDL Display Inaccurate Or Inoperative | E | |||
| Speedometer Inaccurate Or Inoperative | F | |||
| Tachometer Inaccurate Or Inoperative | G | |||
| Driver Information Display (DID) Message Center (1) | ||||
| Change Engine Oil Message Always On | H | |||
| Driver Information Center Compass Inaccurate Or "C" Displayed | I | |||
| Driver Information Center Trip Calculator Inoperative | J | |||
| Driver Information Display Switch Inoperative | K | |||
| Low Engine Oil Level Message Inoperative | L | |||
| Low Oil Pressure Message Always On | M | |||
|
||||