Rear Seat Belt Buckle Replacement (Split Bench)

Fig 1: View Of Seat Belt Buckle & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove rear bench seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . Remove seat cushion. Refer to Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1	Rear Seat (Buckle Side) Belt Bolt (Qty: 3) Tighten: 52 N.m (38 lb ft)
2	Rear Seat (Buckle Side) Belt Assembly Tip: Tilt 60 percent split forward to access 40 percent split assembly.
3	Rear Seat (Buckle Side) Belt Assembly Cover
4	Rear Seat (Buckle Side) Belt Assembly Cover Retainer (Qty: 2)