Preliminary Procedure:
Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2) or Rear Seat Replacement (Avalanche/Escalade EXT) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) . |
| 1 |
Rear Seat Cushion Trim Panel
Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) . |
| 2 |
Rear Seat Recliner Handle
Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) . |
| 3 |
Rear Seat Recliner Outer Finish Cover
Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) . |
| 4 |
Rear Seat Recliner Inner Finish Cover
Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) . |
| 5 |
Rear Seat Cushion Cover Procedure
- Disconnect the seat cushion cover j-channel from the seat cushion frame.
- Disconnect the electrical connector if equipped with heated seat.
- Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.
|
| 6 |
Rear Seat Cushion Pad |