Rear Seat Cushion Cover & Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)

Preliminary Procedure

1. Remove the rear seat. Refer to Rear Seat Replacement (Tahoe with HP2)  or Rear Seat Replacement (Avalanche/Escalade EXT)  or Rear Seat Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Replacement (Tahoe/Yukon/Escalade with Bucket Seat) .
2. Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) .
3. Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) .
4. Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket)  or Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) .
5. Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT)  or Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) .

Procedure

1. Disconnect the seat cushion cover j-channel from the seat cushion frame.
2. Disconnect the electrical connector if equipped with heated seat.
3. Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.